 |
                  |
||
"Rhea Gun" Glock Trigger Kits and Extended Ejectors
One of the most accomplished GSSF and IPSC Master Class competitors who has proven his talents as a shooter and gunsmith, has begun customizing stock Glock parts, utilizing the results of his many years of research and testing. Each part has been personally crafted by GSSF and USPSA Master class shooter, Dale Rhea. They incorporate all of the "tricks" that Dale has learned in the past 12 years of tuning Glock pistols for competition.
As you've seen in Front Sight magazine and reported on www.sportshooter.com, Dale Rhea has found the secret that solves the ejection problems caused by sighting systems that partially block the ejection port of your Unlimited or Open Glock. In addition to solving the mysteries of clean ejection, Dale has begun production of his "well known" trigger job. He has produced a drop-in trigger kit that achieves a 2 pound trigger pull. This trigger kit uses only Glock parts.
Rhea Gun Extended Ejector
This hand-modified version of the stock Glock ejector is a drop-in item that replaces your current trigger housing and ejector. When used in conjunction with a lowered ejection port, this extended ejector will prevent the brass from hitting the sight as it clears the ejection port, preventing a possible jam.
"NEW" Rhea Gun GSSF Stock Approved Glock Drop In Trigger Kit
This is a drop-in trigger kit for a small frame Glock pistol, 9MM or .40 S&W. The contents of this Stock Trigger Kit retains all the safeties of the Glock "Safe Action Trigger" just like the Rhea Gun Competition Trigger Kit.
The trigger pull on the stock Glock model 17 measures 5.5 pounds. By installing a 3.5 pound connector, the trigger pull is reduced to 4.5 pounds. Installing the Rhea Gun GSSF Approved Stock Trigger Kit will produce a trigger pull of 2.5 to 3.0 pounds depending upon your pistol.
This trigger kit is intended for any class of competition use.
Rhea Gun Glock Competition Trigger Kit
This is a drop-in trigger kit for a small frame Glock pistol. It is a two pound competition trigger that retains all the safeties of the Glock "Safe Action Trigger".
The trigger pull on the stock Glock model 17 measures 5.5 pounds. By installing a 3.5 pound connector, the trigger pull is reduced to 4.5 pounds. Installing the Rhea Gun Competition Trigger Kit will produce a trigger pull of 2.1 to 2.4 pounds depending upon your pistol.
This trigger kit is intended for GSSF Unlimited, IPSC and IDPA competition use only.
The trigger kit consists of Glock parts that have been tuned to give a two-pound trigger pull that is safe, light and crisp . Use of these tuned parts will give you the best competition trigger possible on a stock Glock pistol.
Dales tests each trigger kit by:
1. Installing the parts in his personal Glock 17
2. Measuring trigger pull to make sure it is within specification
3. Using it to perform a 3-second run on the plate rack
The trigger kit that you install in your pistol will already be trained to go fast!
Rhea Gun Extended Ejectors @ $39.95 through our website
Rhea Gun Glock Competition Trigger Kit @ $220.00 through our website
(Due to limited quantities on hand, orders will be filled based upon the availability of products.)
To order, click the picture below.
One of the most accomplished GSSF and IPSC Master Class competitors who has proven his talents as a shooter and gunsmith, has begun customizing stock Glock parts, utilizing the results of his many years of research and testing. Each part has been personally crafted by GSSF and USPSA Master class shooter, Dale Rhea. They incorporate all of the "tricks" that Dale has learned in the past 12 years of tuning Glock pistols for competition.
As you've seen in Front Sight magazine and reported on www.sportshooter.com, Dale Rhea has found the secret that solves the ejection problems caused by sighting systems that partially block the ejection port of your Unlimited or Open Glock. In addition to solving the mysteries of clean ejection, Dale has begun production of his "well known" trigger job. He has produced a drop-in trigger kit that achieves a 2 pound trigger pull. This trigger kit uses only Glock parts.
Rhea Gun Extended Ejector
This hand-modified version of the stock Glock ejector is a drop-in item that replaces your current trigger housing and ejector. When used in conjunction with a lowered ejection port, this extended ejector will prevent the brass from hitting the sight as it clears the ejection port, preventing a possible jam.
"NEW" Rhea Gun GSSF Stock Approved Glock Drop In Trigger Kit
This is a drop-in trigger kit for a small frame Glock pistol, 9MM or .40 S&W. The contents of this Stock Trigger Kit retains all the safeties of the Glock "Safe Action Trigger" just like the Rhea Gun Competition Trigger Kit.
The trigger pull on the stock Glock model 17 measures 5.5 pounds. By installing a 3.5 pound connector, the trigger pull is reduced to 4.5 pounds. Installing the Rhea Gun GSSF Approved Stock Trigger Kit will produce a trigger pull of 2.5 to 3.0 pounds depending upon your pistol.
This trigger kit is intended for any class of competition use.
Rhea Gun Glock Competition Trigger Kit
This is a drop-in trigger kit for a small frame Glock pistol. It is a two pound competition trigger that retains all the safeties of the Glock "Safe Action Trigger".
The trigger pull on the stock Glock model 17 measures 5.5 pounds. By installing a 3.5 pound connector, the trigger pull is reduced to 4.5 pounds. Installing the Rhea Gun Competition Trigger Kit will produce a trigger pull of 2.1 to 2.4 pounds depending upon your pistol.
This trigger kit is intended for GSSF Unlimited, IPSC and IDPA competition use only.
The trigger kit consists of Glock parts that have been tuned to give a two-pound trigger pull that is safe, light and crisp . Use of these tuned parts will give you the best competition trigger possible on a stock Glock pistol.
Dales tests each trigger kit by:
1. Installing the parts in his personal Glock 17
2. Measuring trigger pull to make sure it is within specification
3. Using it to perform a 3-second run on the plate rack
The trigger kit that you install in your pistol will already be trained to go fast!
Rhea Gun Extended Ejectors @ $39.95 through our website
Rhea Gun Glock Competition Trigger Kit @ $220.00 through our website
(Due to limited quantities on hand, orders will be filled based upon the availability of products.)
To order, click the picture below.
